NetFort Advertising

Configuring a SPAN session on Nexus 7000

20 February 2019 Forum By: Saleha Gulzar

Here is an example of a SPAN configuration for a Nexus 7000 switch. In my case of the command below, I am monitoring more than 1 vlan.

In configuration mode: source vlan 3, 6-8 both

This guide contains detailed explanations of setting up a SPAN port on the Nexus 7000 switch: https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/113038-span-nexus-config.html

If you have any further questions on this topic, please do not hesitate to contact us at support@netfort.com